17 Ceramic Resonator Manufacturers in 2024
This section provides an overview for ceramic resonators as well as their applications and principles. Also, please take a look at the list of 17 ceramic resonator manufacturers and their company rankings. Here are the top-ranked ceramic resonator companies as of April, 2024: 1.SPK ELECTRONICS CO., LTD., 2.ZONKAS ELECTRONIC CO., LTD, 3.ECS Inc..
Table of Contents
What Is a Ceramic Resonator?
A ceramic resonator is an electronic component that uses the vibration of a ceramic material, commonly lead zirconate titanate, to create oscillations at a specific frequency. These devices offer a more cost-effective and compact solution compared to quartz-based oscillators, making them suitable for many electronic applications where high precision is not critical.
Uses of Ceramic Resonators
Ceramic resonators are typically used in oscillation circuits for clocks in digital circuits, particularly where miniaturization and weight reduction are prioritized:
- Digital clocks and smartwatches
- Timers for home appliances like microwave ovens
- Automobile engine control units (ECUs)
- Audio equipment and musical instruments tuning
- Clock signal generation in data communication equipment
- Measurement and control devices timing control
- Robots and automatic control systems
- Medical device timers and controllers
- Electronic locks and security systems timing control
- Battery management in mobile devices
Principle of Ceramic Resonators
The operation of ceramic resonators is based on the piezoelectric effect, where physical deformation and electrical signals are interconverted in ceramic materials:
1. Piezoelectric Effect
Applying an electrical signal to the ceramic material causes it to deform and vibrate, generating a frequency determined by its physical properties.
2. Vibration Control
The resonator stabilizes the vibration through a feedback control mechanism, using the voltage generated from the ceramic's vibration.
3. Signal Output
The ongoing vibration of the ceramic material produces a voltage, which is then used as a stable clock frequency output.
Characteristics of Ceramic Resonators
Compared to crystal and LC oscillators, ceramic resonators offer several advantages:
1. Compact and Lightweight
Due to the small size of the ceramic materials, the overall circuit can be made compact and light.
2. Cost-Effective
Ceramic materials are relatively inexpensive, making these resonators a cost-effective option for mass production.
3. Low Power Consumption
They generally operate with low power consumption, enhancing energy efficiency in battery-powered devices.
4. High Reliability
Ceramic materials are robust and provide stable oscillations over a wide range of temperatures.
5. Wide Frequency Range
These resonators can operate across various frequencies, suiting a range of applications.
Limitations of Ceramic Resonators
Despite their advantages, ceramic resonators have certain limitations compared to crystal and LC oscillators:
They offer less frequency stability and are not ideal for high-frequency or specific frequency range applications. Unlike LC oscillators, their oscillation frequency is not easily variable, limiting their flexibility in some use cases.
List of 17 Ceramic Resonator Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- Japan
- Taiwan
-
-
-
Knowles Capacitors
Resonators
Manufacturer Overview
Knowles Precision Devices, founded in 1985 in the USA, is a specialty component manufacturer of a wide variety of capacitors, microwave to millimeter wave components, thin film capacitors, and substrates. The company's performance microelectronics products include multi-layer ceramic capacitors, single-layer capacitors, trimmers, mm-wave filters, and resonators for use in critical applications in the military, medical, electric vehicle, and 5G market segments. Examples include radar, pacemakers, MRI equipment, electric vehicles, and mobile phone base stations.
-
-
-
-
-
Abracon
Ceramic resonator
Manufacturer Overview
Abracon LLC, founded in 1992 with headquarters in the USA, is an ISO 9001:2015 manufacturer of precision electronic components for the aerospace, defense, security, medical, and transport markets worldwide. The company's core products include RADAR and LIDAR systems, radio communications, datalinks, aircraft computing, and head-up displays. Transportation products include crystals, oscillators, antennas, and inductors for transportation applications in harsh environments. Abracon LLC's medical solutions include hospital beds, bedside patient monitors, MRIs, and surgery-assisted robotics.
-
-
-
-
-
SiTime Corp
Resonators
Company Overview
SiTime Corp., founded in 2005 and headquartered in Santa Clara, California, is a manufacturer of precision timing solutions like oscillators, clocks, and resonators. The company stocks products like clock generators, network synchronizers, and programmable OCXOs, serving several industries, including automotive, medical, and aerospace. It has shipped over 3 billion devices with failure rates that are less than 1 DPPM and is listed on the Nasdaq Global Market. The company is ISO 9001 certified, and in 2023, it was included for the second time in the Deloitte Technology Fast 500 with a growth rate of 237% from 2019 to 2022.
-
-
-
-
-
ECS Inc.
Ceramic resonator
Company Overview
ECS is a designer and manufacturer of frequency control connectivity, synchronization, and timing solutions, founded in 1980 and headquartered in Lenexa, Kansas, USA. The products are power inductors, Quartz Crystal oscillators, resonators, real-time clocks, and filters. Crystal products include surface mount crystals, through-hole crystals, tuning forks, and crystal units with integrated thermistors. The company serves consumer products, medical applications, automotive electronics, wearable technologies, and power generation fields. The company won the International Award 2022 Global Distributor of the Year and the Largest Customent Count Growth Award.
-
-
-
-
-
SAW COMPONENTS Dresden GmbH
SAW COMPONENTS
Manufacturer Overview
SAW COMPONENTS Dresden GmbH is based in Dresden, Germany, and is a custom manufacturer of surface acoustic wave (SAW) products that was established in 1998 before its acquisition by Japan’s Tamagawa Seiki Co. Ltd. in 2023. The company primarily produces SAW sensors for wireless measurement of various physical parameters, as well as SAW filters for electronic communication. It also offers its wafer foundry capabilities for custom manufacturing of SAW sensors and micro-optics tailored to client projects. The company’s products are commonly used in the telecom, consumer electronics, and aerospace industries.
-
-
-
-
-
KLS Electronic
Ceramic Resonators
Manufacturer Overview
KLS Electronic, founded in 2002 with headquarters and factories in China, is a manufacturer of electronic components that has expanded to have more than 10 subsidiary companies. The company's extensive product line includes resistors, inductors, wiring accessories, automotive connectors, and heat sinks, which are supplied to the industrial automation, instrumentation, power, transport, shipbuilding, and new energy sectors, among others, across 30 regions worldwide. KLS Electronic also holds ISO 9001 management system certificates.
-
-
-
-
-
ZONKAS ELECTRONIC CO., LTD
ZTB CERAMIC RESONATOR
Manufacturer Overview
ZONKAS ELECTRONIC CO., LTD., established in 1982 in Taiwan, is a manufacturer of inductors, capacitors, and electrical components. The company's main products include electrolyte capacitors, multilayer leaded ceramic capacitors, transformers, axial fixed inductors, and gas discharge tubes, used by OEM manufacturers worldwide. ZONKAS ELECTRONIC CO., LTD.'s registered brand is ZONKAS, and the company holds ISO 9001 and IS 14001 certifications. The company has its main factory and secondary office located in China.
-
-
-
-
-
Zhejiang Jiakang Electronics Co., Ltd.
Ceramic resonator
Manufacturer Overview
Zhejiang Jiakang Electronics Co. Ltd., established in 1986 and headquartered in Jiaxing City, Zhejiang Province, China, is a manufacturer of electronic components. The company provides numerous products, including microwave dielectric ceramic components, piezoelectric sensors, and ceramic frequency components. With an annual production capacity of 800 million pieces, its products are exported globally. It collaborates with international partners such as Samsung, Whirlpool, Denso, HID, and Emerson, while also strictly adhering to ISO9001, ISO14001, and IATF16949 quality management system standards.
-
-
-
-
-
Token Electronics Industry Co., Ltd.
Ceramic resonator
Manufacturer Overview
Token Electronics Industry Co., Ltd., established in Taiwan in 1983, is a manufacturer of electronic components and automatic production systems for commercial and industrial clients worldwide. The company produces a wide range of resistors, inductors, light sensors, microwave components, and RF components. Token Electronics Industry Co., Ltd. offers its clients a complete custom design, testing, and manufacturing service. The company's main export markets include Africa, Asia, Oceania, LATAM, and North America.
-
-
-
-
-
Murata Manufacturing Co., Ltd.
Ceramic resonator - CERALOCK(R)
Manufacturer Overview
Murata Manufacturing Co., Ltd. (Murata Manufacturing) was founded in 1944 and is headquartered in Nagaokakyo, Japan. Murata Manufacturing designs, manufactures, and sells ceramic-based passive electronic components and solutions globally. The company operates through components, modules, and others segments, serving communications, mobility, industrial, healthcare, and personal electronics customers. They company's product offerings include noise suppression products, quartz devices,RFID devices, phase shifters, and wireless connectivity platforms. Services such as webinars and video library are also available for existing and potential customers alike.
-
-
-
-
-
Acme Chip Technology Co.
Ceramic Resonators
Manufacturer Overview
Acme Chip Technology Co. Ltd., founded in 2008 and based in Shenzhen, China, is a distributor of electronic components that is ISO 9001 certified. Its products include sensors, power supplies, and optical inspection equipment sourced from several manufacturers, including Advanced Linear Devices Inc., Central Semiconductor Corp., and Fluke. The company also offers a large stock of electronic components, including obsolete components and old code chips that are always available for immediate shipment.
-
-
-
-
-
Aggreko
Ceramic Resonators
Company Overview
Aggreko, founded in 1962, is a global provider of temporary power, energy, and temperature control solutions. The company has over 60 years of experience and 6,000+ employees worldwide, It provides flexible, eco-friendly power options to industries like businesses, governments, utilities, pharmaceuticals, construction, shipping, mining, and petrochemical, among others. With a vast global presence of 60 locations, Aggreko is ISO 45001, ISO 9001, ISO 9001 (Canada), ISO 14001, and OHSAS 18001 certified. Their product line includes solutions like power generation, gas generators, diesel generators, industrial air conditioners, temperature control, cooling towers, rental power, and more.
-
-
-
-
-
-
-
shengyuic
Ceramic Resonators
Company Overview
Shenzhen Shengyu Electronics Technology Ltd., founded in 2008 and headquartered in Shenzhen, China, is an electric component distributor that is ISO 9001 certified. The company stocks several components, including switches, capacitors, and resistors, which it sources from multiple manufacturers like Seiko Instruments, Inc., Renesas Electronics America, and Nuvoton Technology Corporation America. Depending on the size and configuration of the customer’s components, the company provides a full range of packaging services. It accepts single or multiple-part quotations, and its website allows customers to search hundreds of products ranging from ICs to computer accessories.
-
-
-
-
-
Richardson RFPD
Ceramic Resonator
Company Overview
Richardson RFPD, based in Geneva, Illinois, is an electronic component distributor that became a subsidiary of Arrow Electronics in 2011. The company stocks products such as antennas, power supplies, and ICs, and its engineering team brings together over 600 years of combined design experience in IoT product development, wireless, and RF, making it competent from conception to production. The company is ISO 9001 certified and has three international distribution hubs in Asia, Europe, and North America. It sells products from several brands, including Advanced Thermal Solutions, Empower RF Systems Inc., and Carlisle Interconnect Technologies.
-
-
-
-
-
Abundance Enterprise Company
Ceramic resonator
-
-
-
-
-
Hybrid Electronics Corporation
Ceramic Resonators
Distributor Overview
Hybrid Electronics is a global distribution specialist of electronic components, with access to over 50 million unique components. Among the markets HE serves are the aerospace, automotive, communications, defense, industrial, medical, national security, and test & measurement industries. In addition to components, HE also provides quality and compliance testing, counterfeit detection, upscreening, and other forms of quality control. Examples of component subtypes that HE offers include ICs, batteries, capacitors, semiconductor products, sensors, circuit protection, interconnectors, filters, optoelectronics, relays, switches, power supplies, and cables and cable assemblies.
-
-
Ceramic Resonator Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ZONKAS ELECTRONIC CO., LTD |
11.8%
|
| 2 | SPK ELECTRONICS CO., LTD. |
11.2%
|
| 3 | Token Electronics Industry Co., Ltd. |
9.2%
|
| 4 | KLS Electronic |
8.6%
|
| 5 | Zhejiang Jiakang Electronics Co., Ltd. |
8.6%
|
| 6 | ECS Inc. |
8.6%
|
| 7 | Abracon |
6.6%
|
| 8 | Murata Manufacturing Co., Ltd. |
5.3%
|
| 9 | Abundance Enterprise Company |
4.6%
|
| 10 | Hybrid Electronics Corporation |
3.9%
|
Derivation Method
The ranking is calculated based on the click share within the ceramic resonator page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Murata Manufacturing Co., Ltd.: 77,581
- SiTime Corp: 350
Newly Established Company
- KLS Electronic: 2002 (22 years ago)
- SAW COMPONENTS Dresden GmbH: 1996 (28 years ago)
- Abracon: 1992 (32 years ago)
Company with a History
- Murata Manufacturing Co., Ltd.: 1944 (80 years ago)
- ZONKAS ELECTRONIC CO., LTD: 1982 (42 years ago)
- Token Electronics Industry Co., Ltd.: 1983 (41 years ago)
Ceramic Resonator Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Ceramic Resonator Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
4 | 33.3% |
Taiwan
|
3 | 25.0% |
China
|
2 | 16.7% |
Japan
|
2 | 16.7% |
Germany
|
1 | 8.3% |
