13 Point Tap Manufacturers in 2024
This section provides an overview for point taps as well as their applications and principles. Also, please take a look at the list of 13 point tap manufacturers and their company rankings. Here are the top-ranked point tap companies as of April, 2024: 1.MSK Tianjin International Trading CO.,Ltd, 2.Tianjin MeiWha Precision Machinery Co.,Ltd, 3.Endeavour Technologies..
Table of Contents
What Is a Point Tap?
A point tap, also known as a gun tap, is a specialized threading tool designed for threading through holes. It features a twisted and sharp tip.
Due to its twisted and sharp tip, point taps produce chips in a forward direction, preventing chip blockage in the hole. This makes it ideal for trouble-free continuous machining on machines, ensuring stable tapping in mass production scenarios.
However, it is important to note that point taps are not suitable for tapping when a hole has a bottom.
Uses of Point Taps
Point taps find their primary use in machining, especially for large-volume through-holes and continuous machining of mass-produced items.
One of their key advantages is their lower cutting load compared to other taps, resulting in fewer issues like tap breakage and faster processing times. As a result, point taps are preferred in situations where increased productivity and maximum output within a limited timeframe are desired for mass-produced items.
Another benefit of point taps is their resistance to becoming dirty after processing, making it easy to clean both the jig and the final product.
Principles of Point Taps
Unlike hand taps and spiral taps, the tip of a point tap features grooves that direct chips along the blade's direction. The tap's design allows chips to slide down these grooves smoothly.
On the other hand, because the tip's biting portion is cut deeper, point taps cannot reach the bottom of a hole with a hole bottom, and the chips tend to block the hole due to their forward discharge. This makes point taps unsuitable for machining stop holes.
In contrast, spiral taps have spiral-shaped blade grooves that discharge chips in the opposite direction of the tap, preventing chip interference during machining.
Point taps come in two material types: high-speed tool steel (HSS) and cemented carbide. HSS is known for its toughness and resistance to breaking, while cemented carbide is wear-resistant and maintains durability even after continuous machining. Material selection should match the processed material to ensure compatibility.
List of 13 Point Tap Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- India
- Japan
- Taiwan
-
-
-
-
Karnasch Professional Tools GmbH
Solid Carbide Taps
Manufacturer Overview
Karnasch Professional Tools GmbH, founded in 1963 and headquartered in Heddesheim, Germany, is a manufacturer of machining and cutting tools. The company specializes in the manufacturing of optimal-quality cutting tools, including solid carbide drills, end mills, composite tools, and hole saws. These precision-engineered tools offer optimal performance, longevity, and precision, making them ideal for industries requiring premium-precision machining, such as aerospace, automotive, and medical device manufacturing. It is also engaged in manufacturing lubricants, and dental tools and operates in 60 different countries.
-
-
-
-
-
Nbeson Tools India.
High Speed Steel Threading Taps
Manufacturer Overview
Nbeson Tools India (NTI), founded in 1978, is an Indian manufacturer and supplier based in Ludhiana, Punjab, specializing in threading machines and industrial cutters. The company’s offerings include threading machines like bolt, pipe, and rod threading machines, as well as hydraulic and tie rod thread rolling machines. Other types of threading machines offered include cycle fork, scaffolding, pillar type, bed type threading machines, as well as pipe end facing machines. It also offers industrial cutters, including high-speed steel (HSS) annular cutters, HSS milling cutters, involute gear cutters, scalping cutters, and T-slot cutters. Additionally, the company provides HSS threading taps and chasers.
-
-
-
-
-
OSG Corporation
Taps
Manufacturer Overview
OSG Corporation., founded in 1938 and headquartered in Toyokawa, Japan, is a manufacturer of various cutting tools, including end mills, drills, taps, rolling dies, and gauges. The cutting tools are engineered for an array of industries, including energy, automotive, aerospace, die/mold, and heavy. The company also has an academy that it uses as an innovation hub for researching, designing, and developing new products. It established its first overseas subsidiary in the U.S. in 1968, and since then, it has continued to build a network of manufacturing, sales, and technical support locations spanning 33 countries.
-
-
-
-
-
MSK Tianjin International Trading CO.,Ltd
Spiral Point Tap Set
Manufacturer Overview
MSK Tianjin International Trading CO., Ltd was established in 2015 and is located in is a manufacturer of advanced manufacturing equipment for various industrial applications. The company provides milling cutters, taps & drills, tool holders, dies, and, machine tools that have wide applications in manufacturing, mechanics, and, maintenance & repairing sectors. The company passed the Rheinland ISO 9001 certification in 2016 and offers five-axis grinding centers, six-axis tool testing centers, and, CNC tools for hospitals, hotels, universities, schools, and, artists.
-
-
-
-
-
Tianjin MeiWha Precision Machinery Co.,Ltd
Taps Tools
Manufacturer Overview
Tianjin MeiWha Precision Machinery Co., Ltd, founded in 2005 and located in Dongli District, Tianjin, is a manufacturer of NC cutting tools. The company’s products are tool holders, inserts, ball ends, HSS drills, and spiral point taps. The products are made from stainless steel, iron, copper, titanium alloy, and aluminum. It has ISO 9001 and OHSAS 18001 and serves the drilling, boring, milling, and tapping industries. The company exports products to France, South Africa, Switzerland, the United Arab Emirates, and Dubai.
-
-
-
-
-
Asha Traders
Spiral Point HSS Tap
Manufacturer Overview
Asha Traders, a company founded in 1965 in Mumbai, India, is a manufacturer and supplier specializing in cutting tools, drilling tools, and carbide cutting tools. The company manufactures high-precision cutting tools including custom carbide step drills, end mills, and offers coatings, re-grinding, and design services. These products are used in various industries including automotive, defense, aerospace, hydraulics, and medical devices. The company's capabilities are enhanced by additional services such as laser etching, coatings, and re-grinding. The company encourages the development of emerging businesses and facilitate the advancement of established enterprises.
-
-
-
-
-
DIC TOOLS
Pot Spiral Point Taps
Manufacturer Overview
DIC TOOLS, established in Patiala, Punjab in 2012 is a manufacturer of cutting tools which include HSS Cutting Tools and Gear Cutting Tools. Their product portfolio includes solid carbide end mills used for precise milling, high-speed steel (HSS) and HSS-Co drills, high-speed steel (HSS) and HSS-Co drills used in turning and milling operations, and boring bars and tool holders for hole machining. The company serves industries such as Electronics and Semiconductors, Metalworking and Fabrication and Precision Engineering.
-
-
-
-
-
NACHI-FUJIKOSHI CORP.
Cut thread taps
Manufacturer Overview
NACHI-FUJIKOSHI CORP. is a Japanese manufacturer of industrial machinery and tools, such as bearings, hydraulic equipment, robots, and cutting tools. They also provide services such as machine maintenance and repair. The company's products are used in automotive, aerospace, construction, and electronics. One of NACHI-FUJIKOSHI's renowned products is their robotic arm, the "MZR series," which is designed for precision assembly and inspection tasks in industries. They received several awards for their technological advancements and contributions to the industry, including the 2021 Japan Society of Mechanical Engineers Medal for new hydraulic equipment technology and the 2020 Nikkan Kogyo Shimbun Grand Technology Award.
-
-
-
-
-
BAER Tools GmbH
BaerCoil taps
Manufacturer Overview
Baer Tools GmbH, established in 1984 and headquartered in Heddesheim, Germany, is a manufacturer of threading tools and equipment. The company specializes in taps, dies, and thread inserts catering to metal and plastics processing, aerospace, and general manufacturing sectors. Its offerings include BaerCoil and BaerFix threaded inserts known for high pull-out strength and corrosion resistance. These products optimize lightweight construction and component design, enabling the use of smaller threads and less material. The company also offers repair kits to enhance thread durability and load capacity.
-
-
-
-
-
MORSE Cutting Tools
Spiral Point Taps
Manufacturer Overview
MORSE Cutting Tools, founded in Novi, Michigan, in 1864 is a manufacturer of cutting tools, superior endmills and drills. The company's product portfolio includes indexable inserts, including carbide, ceramic, and CBN inserts, used in turning, milling, and threading operations, solid carbide end mills, and boring bars and toolholders. The company serves markets including automotive, aerospace, medical, glass mold, and plastics. The company provides services including national distribution, product selection, custom tooling services, repair and customer service.
-
-
-
-
-
R. S. Tools & Engineers Pvt. Ltd.,
Spiral Point Tap
Company Overview
R. S. Tools & Engineers Pvt. Ltd., was founded in 2000 and is based in Delhi, India, and is a manufacturer and distributor of tools and fasteners for various industries. The company's product folio includes threading tools, drilling tools, milling tools, pop rivets, and, nut inserts that are crucial in aerospace, drilling and well-building, machinery manufacturing, and, mining sectors. The company also offers hex nut washers, self-taping screws, and, end mills of different sizes and shapes that have wide applications in the automotive, chemical engineering, and construction industries.
-
-
-
-
-
Endeavour Technologies.
Machine Tap
Company Overview
Endeavour Technologies, established in 2010 and based in Maharashtra, India, is a manufacturer, exporter, and distributor of engineering systems used for machining techniques in engineering industries. The company produces drill bits, machine taps, shrink-fit machines, probe testers, and holder adapters. The products are used in milling, turning, drilling, manufacturing, and cement industries. The company deals in brands like Komet India, Total Oil, Dormet Tools, Haimer India, and Pramet Tools. The products are exported to Kenya, Tilburg, Saudi Arabia, and Oman.
-
-
Point Tap Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | MSK Tianjin International Trading CO.,Ltd |
12.5%
|
| 2 | Tianjin MeiWha Precision Machinery Co.,Ltd |
12.5%
|
| 3 | Endeavour Technologies. |
12.5%
|
| 4 | Asha Traders |
12.5%
|
| 5 | Nbeson Tools India. |
12.5%
|
| 6 | MORSE Cutting Tools |
12.5%
|
| 7 | DIC TOOLS |
12.5%
|
| 8 | NACHI-FUJIKOSHI CORP. |
12.5%
|
Derivation Method
The ranking is calculated based on the click share within the point tap page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- OSG Corporation: 7,543
- NACHI-FUJIKOSHI CORP.: 7,205
- Nbeson Tools India.: 100
Newly Established Company
- MSK Tianjin International Trading CO.,Ltd: 2015 (9 years ago)
- DIC TOOLS: 2012 (12 years ago)
- Endeavour Technologies.: 2010 (14 years ago)
Company with a History
- NACHI-FUJIKOSHI CORP.: 1928 (96 years ago)
- OSG Corporation: 1938 (86 years ago)
- Nbeson Tools India.: 1978 (46 years ago)
Point Tap Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Point Tap Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
India
|
5 | 45.5% |
Japan
|
2 | 18.2% |
United States of America
|
1 | 9.1% |
Germany
|
1 | 9.1% |
China
|
1 | 9.1% |
Taiwan
|
1 | 9.1% |
