14 Painting Machinery Manufacturers in 2024
This section provides an overview for painting machinery as well as their applications and principles. Also, please take a look at the list of 14 painting machinery manufacturers and their company rankings. Here are the top-ranked painting machinery companies as of April, 2024: 1.Seiwa Industry Co., Ltd..
Table of Contents
What Is Painting Machinery?
Painting machinery is the equipment used for spraying paint.
Conventionally, when applying paint, uneven, three-dimensional areas are covered with a brush, while flat areas are covered with a roller.
However, the larger the area to be painted, the more workers are required and the more time is needed to apply the paint, resulting in more labor hours.
In such cases, the use of painting machinery can reduce the number of labor hours required for painting, and since the paint can be applied more evenly than with brushes or rollers, the surface can be painted cleanly.
Uses of Painting Machinery
Painting machinery is mainly used to paint civil engineering structures such as buildings, exterior walls, and bridges.
Since the price per unit is high for a machine, they are used for painting large areas.
The machine can be used to apply a variety of paints, from general paints for construction to heavy-duty anti-corrosion paints for use in harsh environments.
The main precaution in use is to clean the inside of the equipment with a dedicated cleaning agent, as paint residue left inside the equipment after painting may cause problems the next time the equipment is used.
In recent years, painting machinery has also been sprayed with a stripping agent to remove old paint during renovations.
Principle of Painting Machinery
The principle of painting machinery differs depending on the type.
Diaphragm Type Airless Coating Machines
Diaphragm airless coating machines use electricity or an engine to spray paint, and do not use a compressor.
Two nozzles, one for spraying and the other for sucking up the paint, come out from the main body of the machine. The nozzle for sucking up the paint is placed in the container containing the paint.
When the equipment is turned on, it applies high pressure to the paint, which is then used to draw the paint up. A fine filter at the tip of the nozzle prevents paint clumps from entering the equipment.
The sucked-up paint is then ejected from the spray nozzle and applied. The advantage of this method is that it does not use air, so paint is not likely to be scattered around the equipment when spraying.
Pneumatic Painting Machinery Using Compressor
Pneumatic painting machinery using a compressor is also available. This type of machine sprays paint onto compressed air.
The pneumatic type allows for a more uniform coating of the painted surface. However, more paint will be sprayed onto the surrounding area.
List of 14 Painting Machinery Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Belgium
- Canada
- China
- Germany
- Japan
- Sweden
-
-
-
Nordson Corporation
Nordson Industrial Coating Systems
Manufacturer Overview
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
-
-
-
-
-
Custom Coatings Inc
Paint
Distributor Overview
Custom Coatings Inc. was established in 1991 and is a supplier of painting and coating services in Hickory, North Carolina. The company specializes in handling painting for office buildings, shopping centers, warehouses, and hotels. Its services include roof coatings, concrete polishing, interior painting, and waterproofing available for commercial and residential applications. Its areas of services cover areas across the southeast of the United States. However, for residential customers, its services are only available in Lake Norman, Statesville, Asheville, Boone, Blowing Rock, and Winston Salem.
-
-
-
-
-
Tapflo
PE & PTFE pumps
Manufacturer Overview
Tapflo is a manufacturer and supplier of diaphragm pumps, pulsation dampeners, centrifugal pumps, and filter units that is headquartered in Kungalv, Sweden and was established in 1980. The company serves industrial machinery where the company offers pumping solutions for markets under chemical and petrochemical, food and beverage, pharmaceutical, and water treatment. Their product catalog includes diaphragm pumps, hose pumps, industrial mixers, Eodd pumps, and pulsation dampeners. The company specifically caters to two specified and categorized sectors which are hygiene and food and industrial purposes.
-
-
-
-
-
Gebr. Steimel GmbH & Co.
Paint pumps / Varnish pumps
Manufacturer Overview
Gebr. Steimel GmbH & Co. is a manufacturer of centrifuges and pumps for the industrial sector founded in 1878 and based in Hennef, Germany. The company primarily produces various pumps for standard industrial applications and centrifuges for separating heterogeneous mixtures. It also offers conveyor systems for material transport, and swarf crushers for creating uniformity in or reducing the size of waste metal chips. The company’s products are mainly used in the industrial processing sector, such as by clients in metalworking facilities and foundries.
-
-
-
-
-
ANEST IWATA Corporation
Painting Equipment
Manufacturer Overview
ANEST Iwata Corporation, founded in 1926 in Yokohama, Japan, is a manufacturer of air compressors, spray guns, coating equipment, and vacuum pumps. The company specializes in precision spray equipment and air compressor manufactures a diverse variety of products including but not limited to air compressor, Nitrogen gas generator, food equipment, painting robots and energy saving exhaust set. The products are used in industrial manufacturing, woodworking, aerospace, automotive and similar production industries for various applications such as suction transfer, gas replacement, optimal coating process, uniform material usage in production and producing compressed air for pneumatic equipment.
-
-
-
-
-
TVH Parts Holding NV
Painting a machine
Manufacturer Overview
TVH Parts Co., established in 1969, based in Olathe, Kansas, is a supplier of parts for material handling, industrial equipment, agricultural equipment and small earth-moving equipment. The company’s products include warehouse equipment, forklifts, container handling equipment, tail lifts, and utility equipment vehicles. Additionally, it is based in Olathe, Kansas, and employs 1,200 people, located in Kansas, Illinois, California, Pennsylvania, and Louisiana, among other states. It has 81 branches selling to customers in over 180 countries. The products are shipped daily by land, air, and sea to over 75,000 customers. It employs more than 4,500 people worldwide.
-
-
-
-
-
Ceetec A/S
Painting Machines
Manufacturer Overview
Ceetec A/S is a manufacturer of wood- and metalworking machinery founded in 1970 and based in Nr. Åby on Funen, Denmark. The company offers spraying robots for coating applications, painting machines for applying finishes or paints to workpieces, and brushing machines for surface finishing or preparation. It also offers roll forming lines for shaping metal profiles, and oven drying systems for curing coated or painted surfaces. The company operates in more than 20 countries, and its products are mainly used in the industrial manufacturing sector.
-
-
-
-
-
WIWA Wilhelm Wagner GmbH & Co. KG
Protective Coatings
Manufacturer Overview
Wilhelm Wagner GmbH & Co. KG is a manufacturer of coating and painting technology products founded in 1950 and based in Lahnau, Germany. The company offers painting and coating equipment for surface preparation or decoration, surface sealing equipment for canal or tunnel construction projects, and compound applicators for concrete or steel surfaces. It also offers injection protection equipment for routine or preventative building maintenance. The company’s products are commonly used in vehicle construction, mechanical engineering, and construction operations.
-
-
-
-
-
J. Wagner GmbH
Corrosion & structural protection
Manufacturer Overview
J. Wagner GmbH, founded in 1947 with headquarters in Markdorf, Baden-Württemberg, Germany, is a manufacturer of industrial surface coatings, tools, and equipment. The company offers products for individual consumers (DIY), contractors, and industry. DIY products include airless sprayers, paint rollers, wallpaper steamers, wall paints, fine plasters, and textured paints for home owners. Contractor products include complete systems for painters, plasterers, metalwork, and woodwork specialists. Industrial solutions include a web-based IoT platform for management of coating processes, robotic high-speed atomizers, custom-built powder coating systems, and IPS coating centers used by industries including automotive, infrastructure protection, construction, and agriculture.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Airless paint sprayer – diaphragm pump
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
-
-
-
-
Pro-Tek inc.
Airles Pressure System
Distributor Overview
Pro-Tek inc. was founded in 1982 and is a supplier of paint and body shop equipment products based in Longueuil, Quebec, Canada. The company offers various products such as paint thickness testers, air control units, air dry guns, jetair waterborne drying systems, and HLVP pressure spray. The products are waterborne compatible with stainless steel sets and fluid passages. The products are supplied to the body shop and paint market industries. The company offers warranty for the products for up to 1 year after the purchase.
-
-
-
-
-
KYOEI SHOJI CO.,LTD
Coating Equipment
Company Overview
Kyoei Shoji Co. Ltd is a diversified supplier and distributor established in 1947 and headquartered in Tokyo, Japan. The company offers a wide range of products from organic chemicals to machinery and real estate. These include offset potato harvesting vehicles, imported industrial salt, and silicone carbide. The company has clients across various industries including in glass production, chemical processing, and heavy machinery manufacturing. Some of its notable clients include Caterpillar, Unilever, and Mitsubishi Chemical.
-
-
Painting Machinery Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Seiwa Industry Co., Ltd. |
100.0%
|
Derivation Method
The ranking is calculated based on the click share within the painting machinery page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Nordson Corporation: 7,331
- ANEST IWATA Corporation: 1,799
- KYOEI SHOJI CO.,LTD: 110
Newly Established Company
- Pro-Tek inc.: 1982 (42 years ago)
- Seiwa Industry Co., Ltd.: 1971 (53 years ago)
- TVH Parts Holding NV: 1969 (55 years ago)
Company with a History
- Gebr. Steimel GmbH & Co.: 1878 (146 years ago)
- KYOEI SHOJI CO.,LTD: 1947 (77 years ago)
- Nordson Corporation: 1954 (70 years ago)
Painting Machinery Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Painting Machinery Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Japan
|
3 | 27.3% |
United States of America
|
2 | 18.2% |
Germany
|
2 | 18.2% |
Sweden
|
1 | 9.1% |
Belgium
|
1 | 9.1% |
China
|
1 | 9.1% |
Canada
|
1 | 9.1% |
